Print Spooler Keeps Stopping Issue

Print spooler is a software service that works smoothly to operate the printing process. If it fails, the user will not be able to use the printer to print a document. 

If that’s the mistake you’re facing, and you’re trying to fix it, this post is the best you’ll find.

To correct this glitch, first, read every method and then execute them one-by-one. Ideally, after trying the methods below, you will be able to solve the fix print spooler keeps stopping problem that effectively stops the problem. So let’s go on learning the process.

Why does the Print Spooler get Windows 10 stopped?

Several factors cause the print spooler to stop error, and they are as follows: 

A Print Failure of the spooler Print problem setting No matter what triggers this issue, the methods mentioned below should Try it.

If you’re lucky enough, you’ll solve the problem after trying a few of the methods.

Description: C:\Users\admin\Downloads\printer\Print Spooler Keeps Stopping Issue.jpg

How to resolve the issue of the Print Spooler Stop?

To fix the problem, read the methods thoroughly at first and learn the steps until the end. Try to get rid of this problem one by one as arranged here once you understand the processes.

Method 1: Restart the Print Spooler Service

The primary way to try to fix this issue of print spooler is to restart the Service of print spooler. The steps to accomplish this task are as follows:

1.first, to open the Run bar window, press both Windows and the letter R key at a time.

2. Then make sure nothing in the run bar is it written. Tap the Backspace key to omit the command if you find anything in the Run window.

3. Instead, without quotes, type “services.msc” in the Run bar.

4. Next, hit the Enter key or press OK. It will open the screen’s Services tab.

5. Now scroll down the Services window to get under it the Print Spooler option.

6. Tap on the button Print Spooler.

7. Then press the Restart button from the right side of the Services window.

Now, wait for the restart of the Print Spooler operation. Ideally, you can get a good result from this process.

Method 2: Ensure that the Print Spooler Sevice is Collection as Automatic

If this issue still occurs after restarting the Print Spooler service, then you need to make sure that the print spooler service has set to automatic in the next step. 

The steps for executing this method are listed below: 

1. First, follow Method steps 1 to 4 (i.e. restart the Print Spooler Service).

2. Also, scroll down to the Print Spooler option from the Services window.

3. First, right-click Print Spooler, then from the window pick Assets.

4. Afterwards, check the “Startup form” section under the Print Spooler Properties window and set it as “Automatic,” if not already.

5. Finally, press Apply and then click OK.

6. Then check to see if your printer is functioning as usual as before.

Method 3: Check the Recovery Tab Settings of the Print Spooler

One important thing to consider in fixing this issue of print spooler is the Print spooler recovery options, whether or not set correctly. 

To ask about the settings for Print Spooler Recovery, 

1. Follow the steps below: follow Method steps 1 to 4 (i.e. restart the Print Spooler Service).

2. After that, go under the Services window to the Print Spooler section and double-click it to open the Properties tab.

3. Tap the Recovery tab next.

4. Also, under the Print Spooler Properties window, ensure the following settings.

5.First failure: restart Service Second failure: 

6.restart Service Subsequent failures: 

7.restart the Service Subsequently, click Apply and OK to save the changes.

8. Now run a printing job after performing the above steps to check if the problem is solved or not. 

Ideally, this time, the answer will be yes. If no, do not worry, however, and continue with additional solutions.

Method 4: Delete the Print Spooler Files

If you don’t get the answer you’re looking for the above methods, then try this method. It is the approach that will get a positive outcome for many of the users. So, let’s go on.

1. Once again, follow Method 1 steps 1 to 4 (i.e. restart the Print Spooler Service).

2. Now, go to the Services window and click on the “Print Spooler” button.

3. After that, pick the Stop option to stop the print spooler service from the right side of the window.

4. First, reduce the window of Products.

5. To open the File Explorer window, tap both the Windows and the keyboard letter E.

6.Go to: C:\Windows\System32\spool\PRINTERS for further description. If you get an open permission window, press Continue to continue. 

7. Delete all the files in the PRINTERS folder after that.

Further Steps:

Follow additional instructions to complete this process.

Now tap the Windows key to open the Run bar window together with the letter R. Also, enter control in the Run bar. Next, click, OK. 

Set the “View by” in the category under the Control Panel tab. First, select the “Display Devices and Printers” connection under the Hardware and Sound section under the Control Panel tab. 

Then right-click on the printer device you are using under the Printers section. After that, pick the “Disable app” from the menu window.

Again, open the Services window already begun under the Taskbar panel on the screen. First, click the print spooler keeps stopping Start option from the left side of the Services window. 

After that, go back to the Control Panel Devices and Printers segment. Also, right-click on an empty window space and under the menu tab pick “Connect computers and printers.”Also, follow the instructions for re-adding your printer on-screen.

Now, try using the printer to check whether or not the problem gets sorted.

All of these workarounds are successful in repairing this annoying problem. When you face some difficulty in implementing any of the above methods, then choose a technician to help solve the problem. 

Also, these methods can be used to fix the print spooler that stops the Windows 7 problem.

Leave a comment

Your email address will not be published. Required fields are marked *